Builders & Architects
Scan-to-BIM & As-Builts
Start pre-construction with measurements you can trust. Instead of tape-measure field notes, we draw the existing conditions in Revit from the scan and deliver clear PDF drawings and a 3D walkthrough, so your team can bid and plan with fewer unknowns.
Photos (modified): L Maule, CC BY-SA 4.0 · Dwight Burdette, CC BY 3.0
Deliverables
What You Get
| Deliverable | Format |
|---|---|
| 3D walkthrough of the existing building, password protected and shareable with your subs | Web link |
| Existing-conditions drawings: floor plans, exterior elevations, building sections, roof pitches, doors & windows | |
| Demolition plans | |
| Visible MEP locations (outlets, fixtures, registers, equipment) | Noted on plans |
| Reflected ceiling plans | On request |
| Permit set prep, submittal, and reviewer responses | Hourly, fees passed through |
Matterport rates the Pro3 at about ±20 mm at 10 meters. The scan captures visible conditions only; verify critical dimensions in the field.
Working with an architect? Revit models of existing conditions are available on request.
Request an Estimate
Ready to start with accurate measurements?
Tell us a little about the property and what you need. We’ll follow up with scope, deliverables and a quote.
- EmailBrianE@As-BuiltDesignStudio.com
- Phone(386) 227-7310
- StudioPalm Coast, FL