Construction & Commercial

3D Scans and As-Built Drawings for Construction and Commercial Projects

Before Work Starts · Before the Walls Close · At Completion

A Matterport Pro3 scan records a building exactly as it stands on the day we visit. Brian Eicholtz, a designer with 34 years of experience designing buildings, turns those scans into as-built drawings and 3D CAD digital twins, so your team plans from real conditions.

Left: roof framing on a home designed by Brian Eicholtz. Right: a two-story commercial building under construction, a project Brian worked on as a design team member.

Home Design: Brian Eicholtz

Backed by 34 Years of Design Experience Based in Palm Coast · Serving Flagler County and Northeast & Central Florida Out-of-state projects by arrangement

Phase by Phase

A Scan for Each Stage of the Project

A building changes quickly once work begins. We scan at the milestones you choose, and each scan stays a complete 3D walkthrough of the building on that day. When a question comes up later, open the scan from that stage and look.

  1. Phase 1Before Work Starts

    A record of existing conditions before anything is removed or changed. It helps confirm the scope, plan demolition, and show everyone on the team what’s there, including people who can’t get to the site.

  2. Phase 2Before the Walls Close

    Framing, plumbing, electrical, and mechanical runs are recorded while they’re still visible, so later you can see what’s behind the finished walls and ceilings.

  3. Phase 3At Completion

    The finished building, documented for the owner and facility managers, and ready to compare with the earlier scans.

Who It’s For

One Accurate Record for the Whole Team

We work with every type of building, from offices and shops to warehouses and multifamily, including projects already under construction.

  1. Builders & contractors

    Plan, bid, and coordinate your subs from a walkthrough of the actual site. With the owner’s approval, you can share it with your team, and we can prepare PDF as-built and demolition drawings.

  2. Developers & owners

    A dated record of the building at each stage that you can open from anywhere, to check progress or walk a partner through the project without a site visit.

  3. Facility managers

    After completion, the walkthrough and drawings are a reference for maintenance, renovations, and future tenant improvements, including what was recorded before the walls closed.

  4. Architects & design teams

    Start your design from accurate existing conditions. We model the existing building in Revit from the scan, and a Revit model is available on request.

Deliverables

What You Get

Deliverables for construction and commercial projects
DeliverableFormat
A password-protected, high-definition interactive 3D walkthrough for each scanWeb link
Measurements taken right in the walkthrough: wall lengths, ceiling heights, openings, clearancesIn the walkthrough
As-built drawings: floor plans, exterior elevations, building sections, demolition plansPDF, optional
3D CAD digital twin of the building, the basis for drawings and designOptional
Revit model for architects and design teamsOn request

Matterport rates the Pro3 at about ±20 mm (under an inch) at 10 meters.

Why a Designer

From Scan to Drawings You Can Build From

A 3D walkthrough is a great record. For many projects, the next step is drawings and a model the whole team can work from. Brian Eicholtz has spent 34 years designing buildings, and he has worked on commercial projects as a member of a design team, so he reads a scan the way a designer and a builder would.

We bring the scan into Revit and model the building as it actually stands. The as-built drawings, the 3D CAD digital twin, and any design work that follows all start from the same measured information, in the same studio.

  • Every building type welcome
  • Projects under construction
  • As-built drawings drawn in Revit
  • Design work when you need it

Questions

Good to Know

Can you scan a building that’s under construction?

Yes. We document projects under construction, recording conditions as they stand on the day of the scan. Reach out and we’ll give you a firm date and time for each scan.

How soon will we see the 3D walkthrough?

The interactive 3D walkthrough is often ready within one business day of the scan, and usually within two. Turning the scan into the 3D CAD model depends on our workload at that time of year, and we’ll tell you that timeframe when you make your request.

Who can see the scans?

Walkthroughs for design and construction projects are hosted in our password-protected Matterport account and shared only with people the owner approves.

Does the scanner work outdoors?

Yes. The Matterport Pro3 uses LiDAR, which works in direct sunlight, so we can scan the outside of the building and the site as well as the interior.

More answers on our FAQ page.

Estimates

How to Get an Estimate

Send us the property address, the approximate size of the building, which phases you’d like scanned, and the level of service you need: the Matterport Pro3 scan with a high-definition interactive 3D walkthrough, or that plus as-built drawings and a 3D CAD digital twin. Pricing is by the square foot and depends on how complex the building is. We’ll follow up with the scope, schedule, and a quote.

Request an Estimate

Request an Estimate

Have a project to document?

Tell us about the building, the phases you’d like scanned, and what you need. We’ll follow up with scope, deliverables and a quote.

We’ll reply by email.