FAQ

Frequently Asked Questions

Straight answers about scanning, drawings, and getting started. Don’t see your question? Email BrianE@As-BuiltDesignStudio.com or call 386.227.7310.

General

Do you offer Matterport scanning in Palm Coast?

Yes. We’re based in Palm Coast and scan with a Matterport Pro3 throughout Flagler County, including Flagler Beach, and across Northeast and Central Florida, from Jacksonville, Ponte Vedra, and St. Augustine to Ormond Beach, Daytona Beach, and Orlando. Projects outside Florida can be arranged case by case.

What is a Matterport Pro3 LiDAR scan?

The Matterport Pro3 is a professional 3D camera. We set it on a tripod and move it from spot to spot through the property. At each spot it turns a full 360 degrees, measuring the space with LiDAR (a laser that measures the distance to the surfaces around it, about 1.5 million points per scan) while it takes high-resolution photos. Matterport’s software then joins all of the spots into one measured 3D model of the building.

Because LiDAR uses its own laser, it works in direct sunlight, so we can scan porches, pool decks, and the outside of the building as well as the interior. Matterport rates the Pro3 at about ±20 mm (under an inch) at 10 meters.

What that means for your project:

  • Existing conditions are recorded the way they are, including walls that aren’t square and ceilings that aren’t level, so the design starts from accurate information.
  • Fewer trips back to the site to check a dimension.
  • A high-definition interactive 3D walkthrough you can open on a phone, tablet, or computer, password protected for design and construction projects.
  • A more complete record than tape-measure notes: the whole space is captured, not just the measurements someone thought to write down.
Who will design my project?

Brian Eicholtz, our founder. He’s a designer with 34 years of experience designing buildings, from custom new homes to remodels and additions. If your project needs a licensed engineer’s or architect’s stamp, we’ll coordinate with one or refer you.

Do you scan commercial buildings?

Yes. We’re glad to help with commercial projects of all kinds, from existing buildings to projects under construction, where we document the construction conditions as they stand on the day of the scan. Get in touch and tell us about your project; we’d be glad to talk it through.

Can you design my remodel or addition?

Yes. We scan your home, draw accurate existing plans, and design your remodel or addition in 3D so you can see it and make changes before anything is built. Once you approve the design, a structural engineer designs the structure (you pay the engineer directly, with no markup from us), and we prepare the final drawings for permit and bidding.

Scanning & Tours

How long does a scan take?

An average home of about 2,000 sq ft usually takes around two and a half hours on site. Larger or more complex homes take longer, and outdoor scanning depends on the weather. We’ll give you a time estimate when we schedule.

What is a 3D walkthrough?

It’s a 3D model of the property, made from the scan, that you can walk through on a phone, tablet, or computer at any time. Built-in tools let you measure ceiling heights, wall lengths, sill heights, and clearances without another site visit. For design and construction projects, it’s hosted in our password-protected Matterport account and shared only with people the owner approves.

Do you make 3D tours for real estate listings?

Yes. We scan the home inside and out, so buyers can move from the living room out to the pool deck and down to the dock in one continuous tour and measure rooms as they go. You get a link you can share with buyers and add to your listing. We’re happy to schedule around your photographer.

Can our walkthrough go on the MLS, Zillow and Realtor.com?

Yes. We provide an unbranded, MLS-ready link, usually within 1 business day, that meets Stellar MLS rules. Your agent adds it to the MLS Virtual Tour field, and Realtor.com, Homes.com and Redfin show the tour from there. On Zillow, it appears as a virtual tour link in the Facts & Features section. The listing sites don’t charge to show the tour, and hosting is $50 per year to keep the link live.

Drawings & Files

What is an as-built drawing?

An as-built (or existing-conditions) drawing shows a building the way it actually stands today, not the way anyone assumes it is. We draw them in Revit from the scan, including floor plans, elevations, and building sections, and ceiling heights, trays, coffers, beams, and soffits are documented as standard.

What do builders receive?

Builders receive PDF drawings and a password-protected 3D walkthrough that, with the owner’s approval, you can share with your subs. The drawings include existing floor plans, exterior elevations, building sections, roof pitches, doors and windows, and demolition plans, with visible outlets, fixtures, registers, and equipment noted. CAD files aren’t part of the builder package.

Can you give my architect a Revit model?

Yes. Architects can request a Revit model of the existing conditions, so their design starts from what’s really there. Interior designers receive PDF drawings and DWG files they can open in AutoCAD, and a Revit file is available on request.

Is a reflected ceiling plan included?

Ceiling heights, trays, coffers, beams, and soffits are documented as standard. A detailed reflected ceiling plan with existing fixture locations is available on request only, so please ask for it when you request an estimate and we’ll include it in the bid.

Pricing & Scheduling

How do I get an estimate?

Use the Request an Estimate form, email BrianE@As-BuiltDesignStudio.com, or call 386.227.7310. Send us the property address and the level of service you need: a Matterport Pro3 scan with a high-definition interactive 3D walkthrough, or the scan and walkthrough plus a 3D CAD digital twin of the building. Both are priced by the square foot, and the price depends on how complex the property is. We’ll follow up with the scope, deliverables, and a quote.

How soon can you scan, and when will I get my drawings?

Reach out and we’ll give you a firm date and time for the scan. The interactive 3D walkthrough of the existing property is often ready within one business day of the scan, and usually within two. Turning the scan into the 3D CAD model that the drawings and design are built on depends on our workload at that time of year, and we’ll tell you that timeframe when you make your request.

Ready to talk about your project? Request an estimate and we’ll reply by email.

Request an Estimate

Ready to start with accurate measurements?

Tell us a little about the property and what you need. We’ll follow up with scope, deliverables and a quote.

We’ll reply by email.